Elastic polymer joint with a cement look

Delivery Information

- Click here for all information regarding home delivery and delivery times.

Product Information

Special joint sealant for expansion and connection joints in ceramic tiles 2 cm thick. Because this joint sealant looks like a cement joint, the product can also be used as a replacement for conventional grouts.

Staenis experience: Application when grouting 2 cm thick ceramic terrace tiles with 3 mm joint (grouting the entire terrace with Cemflex). Place 5 mm silicone grout at the top of the tile, use a silicone sealant, possibly without smoothing compound, to remove excess silicone.

Application Areas:

- For elastic jointing in cement look of ceramics 2 cm thick.
- As an expansion joint, visually indistinguishable from the cement joint.

With ceramic tiles of 2 cm thickness, this can be used without a primer.

Specifications

- contents per tube : 310 ml

- View the colour chart below (you can select the desired colour above at "make my choice").

- mist (nebel)

- cement grey (zementgrau)

- stone grey (steingrau)

- anthracite (anthrazit)

- ivory (elfenbein)

Instructions for Use

1. 1. The contact surfaces must be dry, clean, grease- and dust-free; clean with AKEMI Cleaner A for natural and artificial stone, tiles, ceramics, glass, unlacquered wood, and metals; AKEMI Cleaner I for plastics and painted surfaces.

   2. To avoid three-sided adhesion and for deeper joints, use AKEMI joint hoses. Use closed-cell PE joint hoses for use in damp areas or outdoors; in other cases, use open-cell PUR joint hoses. Joint size min. 6 x 6 mm.

   3. Protect joint edges with AKEMI masking tape for stone.

   4. When used in wet areas or outdoors or on special substrates (see primer table), we recommend using AKEMI primer first.

   5. Processing temperature from +5°C to +35°C.

   6. Apply product and smooth within 5 to 10 min. An optimal matte effect is achieved by dry wiping, without using a smoothing agent.

   7. Remove the used masking tape before skin formation in the direction of the joint.

   8. Curing depends on layer thickness, temperature, and relative humidity and is approximately 1 to 3 mm / 24 hours.

   9. Tools can be cleaned with AKEMI Cleaner A

Downloads

Download the product flyer here.