The Staenislat is part of the Staenis grid for dragging up traditional screed, insulation screed, drainage mortar or levelling granules.
8 rails + 5 legs = about 1 m²
(depending on space to space)
| Availability: | In stock in Olsene |
Delivery Information
- Click here for all information regarding home delivery and delivery times.
- Click here for all information regarding pickup in Olsene (East Flanders, Belgium).
Product Information
- All product information can be found at www.staenis.com.
- Click on the following specifications: screed, insulating screed/insulating mortar, dry floor, and terrace for targeted floor construction information.
Product is developed and produced in Belgium.
Required Quantity
- 8 slats + 5 legs = ± 1 m² (number of m² is an indication)
Note: The exact number of m² varies from room to room, so always plan for a bit extra, especially for smaller areas and surfaces with edges and corners or requiring more finishing work against walls (such as in hallways). Perhaps first make a sketch with an estimate of the grid placement.
- Use our quantity calculator for easier calculations.
Specifications
- The leveling raise slat is an extension on the leveling leg to adjust the height of the leveling grid, for thicknesses between 9 and 10,1 cm.
- Packed per 25 pieces.
- Dimensions: 10 x 4,5 x 2 cm (L x B x H)
- Useful height: 1,1 cm (as an elevation on the leveling leg)
- For heights over 10.1 cm, we recommend a leveling extension leg.
Downloads
- Information brochure
- Technical data sheet about the Staenis grid
